Skip to content Skip to sidebar Skip to footer
Home / civil 3d drawing line not by delta

civil 3d drawing line not by delta

Post a Comment

Back

Using Templates and Cartoon Settings for Civil 3D Implementation

Introduction

AutoCAD® Civil 3D® is complex software with many unlike and connecting parts working together to provide solutions to civil design projects. In this commodity we are going to explore how to utilise template files to capture characteristic and object settings that you can utilize to beginning your new drawing or reference into an existing cartoon. For a successful implementation, the CAD managing director or designer can create, update, and distribute template files to all users to ensure a standard and uniform arroyo to blueprint work.

Templates

Any new drawing in Civil 3D starts with a default drawing template or a custom template you can create. Cartoon template files are drawings that shop styles, settings, layers, and layouts in a drawing including title blocks.

Standard Template Procedure

When y'all create a new drawing based on a cartoon template, the new drawing gets a re-create of the styles in the template, but information technology is a one-time copy. The connection is not maintained; therefore, if you update the template it will non update your cartoon file. For case, if you update the surface styles in your template and yous wanted your drawings to become those aforementioned updates, you lot needed to manually copy or import those changed styles into your drawings.  You tin can do this past dragging and dropping or selecting the import tab on the Ribbon as shown in Figure one.

Effigy one: Import styles

Templates are too listed under the Cartoon Templates drove in the Prospector tree Master View equally shown in Figure ii.  Notice the 2 Civil 3D templates supplied from Autodesk.

Effigy ii:  Templates under the Chief View in Prospector

2 templates are provided when you install Ceremonious 3D.  The path for these templates can exist found inside the options dialog box under the Files > Templates folder.  We are going to open the _Autodesk Civil 3D (Imperial) NCS.dwt and relieve this to C3D_Standard.dwt. The two AutoCAD Ceremonious 3D drawing templates are based on the U.s.a. National CAD Standard®.

  • _AutoCAD Civil 3D (Imperial) NCS
  • _AutoCAD Civil 3D (Metric) NCS

These templates contain an extended set of styles and settings. When you start a new drawing with the New command on the Awarding carte du jour, you tin choose which template you lot want to use.

The QNEW control, which is bachelor on the Quick Access toolbar, automatically uses the template specified in the AutoCAD Options dialog box.

Effigy 3: The main templates provided

We are now going to change the settings of our template file (Figure iv). Open up the template file you lot created named C3D_Standard.dwt on the Home tab of the Ribbon > Palettes console > Open Toolspace.

  1. On the palette, move to the Settings tab.
  2. Make certain yous are in the Active Drawing Settings View and right-click C3D Standard as shown.
  3. Select Edit Drawing Settings.

Note: If you move upwardly and down on this palette there are hundreds of dissimilar settings that can be applied to all types of Civil 3D object data.

Effigy four: Drawing settings

C3D Drawing Settings

Settings in Civil 3D control many preset values, such equally drawing units, scale, and coordinate system. Civil 3D has drawing, characteristic, and control settings. All three levels of settings in AutoCAD Civil 3D are saved with the cartoon, and they tin can exist saved to a drawing template.

  1. Drawing settings: Establish values for the whole cartoon.
  2. Feature settings: Control behavior for a feature, such as Surfaces or Parcels.
  3. Command settings: Apply to individual commands within a feature, such as the AddParcelAreaLabel command within the Parcels characteristic.

You lot modify each level of settings at a different location in the Settings tree, as shown in Figure 5.

Figure 5: Setting tree

Permit's focus on the main cartoon Drawing-Level Settings and Feature Level Settings. To access drawing-level settings, right-click the drawing name C3D_Standard in the settings tree and click Edit Drawing Settings as shown in Figure half-dozen.

Figure half-dozen:  Edit Drawing settings

At the drawing level, the Edit Settings dialog box contains general tabs for the cartoon (or template) as shown in Figure seven.  Nosotros do non want to modify any of these settings except for the Object Layers. Ambient Settings tin can be altered, but volition exist overridden by the cartoon and feature settings.

Figure 7: Cartoon settings

To illustrate how this works, we will edit 1 of these settings in the Object Layers section.  Motility to the Object Layers tab on the dialog box and ringlet down to Tin Surface as shown in Figure 8. We are going to add together a suffix to the default label using a wildcard to ensure that our surface is e'er on the C-Topo- layer with a suffix of the surface name (i.e., C-Topo-EG).

Figure 8: Object layers

  1. Motility to the C-TOPO layer.
  2. Change the value to Suffix.
  3. Add together a -* to the value field.  The hyphen will exist added to C-TOPO and the surface name will be appended to the stop of the layer (i.eastward., C-TOPO-EG).

Y'all have now created a standard for Tin Surface layers in Civil 3D and can implement this procedure. Explore other options at the drawing settings level to ensure your template is ready to go.

Figure 9: Object Layer modifications

Characteristic-Level Settings

Utilise the object collection level in the Settings tree to control all settings that pertain to the object type. Access the object or feature-level settings by right-clicking the object collection in the Settings tree and clicking Edit Feature Settings.  For this example, we are going to select the Point Collection.

Figure 10: Point Feature settings

At the object level, this dialog box also contains object-specific settings, such equally default signal styles. In this section we can control how our point characterization styles are in our drawing as default. If we want all the points to be brought in as a particular style or maker, we can edit these values as our default inside our template file. Figure eleven shows the Signal Label Way and the dialog box to change the value within the object feature settings.

Effigy 11: Edit Feature settings

Control-Level Settings

Utilise the Commands drove level in the Settings tree to override both the object-level settings and drawing ambient settings on a control-by-command ground. Yous can also specify command-specific settings. Admission the command-level settings by expanding the Commands collection for an object type in the Settings tree, right-clicking the command, and clicking Edit Command Settings. Figure 12 shows us editing the command level settings for a surface.

Effigy 12: Command-level setting

Layer Standards in Templates

Maintaining a standard for the utilize of layers in your drawing is easier if you have a drawing template with predefined layers, and styles that reference those layers when objects are created.

For consistency, save your template every bit an AutoCAD® standards file (.dws format). Then, in the template, enter the STANDARDS command and in the Configure Standards dialog box, link the standards file to the template. If you lot want to enforce the standards, y'all tin can click the Settings push and actuate notifications of standards violations or override such violations. For additional information on the CAD Standards Managing director see CSI: CAD Standards Implementation at Autodesk University 2017. https://autode.sk/2T0ozBa

The layers created in the AutoCAD Ceremonious 3D 2018 templates follow the National CAD Standard (NCS) rules. For more data nigh the National CAD Standard layering settings, see http://www.nationalcadstandard.org.

Now that you have many of your standards in place for your template, we need to ensure that the template is used on new drawings.  From the application carte du jour, select New and your open dialog box volition be displayed equally shown (Figure 13). Select the C3D_Standard.dwt and all your settings will be within the new drawing.

Figure thirteen: New template

Note: To control the location of template files and QNEW, review the options under the FILES menu > template settings.

Reference Templates

New to Civil 3D 2022 is a procedure called reference templates. The command can be found on the Manage tab of the Ribbon > Styles palette > Reference, as shown in Figure xiv

Figure 14: Import styles

When you attach a reference template to a cartoon, the AutoCAD Civil 3D styles that are in that reference template are copied into the drawing, and the connectedness between the drawing and the reference templates is maintained. Drawings can exist updated on an ongoing basis either automatically or manually with changes to the styles in the templates.  We are going to add a reference to our electric current drawing file (Figure 15).

Figure xv: Attach Reference Template

As we piece of work on our project, changes to the reference templates are pushed to the drawing so it is kept upwards to engagement:

  • New or changed styles in reference templates are copied to the drawing.
  • Styles that are deleted from reference templates are removed from the drawing if the styles are non in utilise. If a style is in apply, a local re-create of the style is fabricated in the drawing.

Select the update button for the template to be added to the cartoon. In the Toolspace Settings tree, styles that have been referenced into the cartoon are marked with a paper clip icon as shown in Figure 16.  Discover how the surface styles are now being controlled past the reference template and not the drawing settings.

Figure 16: The Paper Prune

As you continue to update and/or add together new styles to the projection standards template, those changes are pushed to the drawings that reference that template.

The post-obit AutoCAD Civil 3D components tin be imported and referenced by a reference template.

  • AutoCAD Layers
  • AutoCAD blocks, text styles, and linetypes
  • Settings
  • Cartoon Settings
  • Abbreviations
  • Ambient Settings
  • Object Layers
  • Feature Settings
  • Label Mode Defaults
  • Styles
  • Label Styles
  • Object Styles
  • Table Styles
  • Pipe and Structure Rules
  • Force per unit area Network Parts lists
  • Quantity Takeoff Criteria

If you try to edit a surface manner (i.e., rename a layer color) you will get the following error indicating that your style is existence controlled past a referenced template or a company standard. You do have options to override the setting as shown in Effigy 17, but this is a good reminder to all of us while we work on drawings and maintain our company standards.

Figure 17: The warning

Conclusion

In a perfect globe, your drawing templates and settings will have the perfect fix of styles for your projects. This typically takes time to abound and can be considered a living template. Consider designing styles to reflect the information requirements at dissimilar times in the project.  The templates are there as a guide to provide you with the bones information needed to begin your design projection efficiently. Yous can create styles and templates for many different disciplines and still follow your visitor standard. Keep the implementation process going and create your template to help guide your users and your company to a better, more standard arroyo to pattern work.

Sam Lucido is a CAD Services Managing director with Haley & Aldrich, Inc. He has more than 25 years of feel involving design, user support, and customization. Sam is an Autodesk certified professional person and an Proficient Elite Member. He uses his vast knowledge nigh AutoCAD and Ceremonious 3D to help provide support to technology and design teams past holding easily on workshops and online training. Sam is a pinnacle-rated Autodesk University and Midwest University Speaker as well as existence an AUGI Board Member. Y'all can reach Sam at CADProTips.com or by electronic mail
at lucido1373@gmail.com.

pharrpheine.blogspot.com

Source: https://www.augi.com/articles/detail/using-templates-and-drawing-settings-for-civil-3d-implementation

Post a Comment for "civil 3d drawing line not by delta"